VA Turkey.com http://vaturkey.com/phpBB2/ |
|
Cutting the Reeds in a Diaphram Call http://vaturkey.com/phpBB2/viewtopic.php?f=1&t=58 |
Page 1 of 1 |
Author: | WVBOY [ Mon Dec 27, 2004 3:34 pm ] |
Post subject: | Cutting the Reeds in a Diaphram Call |
OK fellows.. Santa brought me a Call PurrFect call maker kit for X-mas.. I've made a couple practice calls.. they sound OK.. What I'm wondering is what you guys who make calls for a living, or make them for your own use like I'm doing use to make the cuts in the reeds.. I just used a small pair of Siccors but the cuts were not precise enough for my liking. It made them real Jagged and I'm sure effected the tone overall. I know some of you guys either have this Kit or something similar to make your own calls and just wondered if you would share what you use to cut the reeds with.. I'm thinking there may be some tool out there that will do it.. I was thinking of making something myself that involved razor blades but wanted to ask first.. I would like to be able to make the Half Moon Cut and the Split V cut at least with some sort of consistency without eyeballing it everytime.. Thanks, |
Author: | Diablo [ Mon Dec 27, 2004 3:53 pm ] |
Post subject: | |
you will need smallest fiskar scissors you can find small pair of surgical scissors and tweezers that OPEN when you press them and stay closed in their relaxed position |
Author: | Max [ Mon Dec 27, 2004 8:02 pm ] |
Post subject: | |
Agree with Jeff 100%..PLUS.........SHARP!..dull just will not cut it.. |
Author: | Coach [ Mon Dec 27, 2004 8:30 pm ] |
Post subject: | Use a sharp pair |
Also the tension you have on the reeds will also impact the cut you make. so watch out. Remember that back tension is just as important as the left to right tension. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |