VA Turkey.com http://vaturkey.com/phpBB2/ |
|
Call repair http://vaturkey.com/phpBB2/viewtopic.php?f=1&t=1333 |
Page 1 of 1 |
Author: | Beardedturkey [ Thu Mar 30, 2006 10:59 pm ] |
Post subject: | Call repair |
One of my calls recently broke. The slate seperated from the pot. It did not break the glue just failed. I would like to know what type of glue is best to use. Bill |
Author: | TScottW99 [ Fri Mar 31, 2006 3:57 am ] |
Post subject: | |
If you have a custom or production call you might want to contact the call maker. Depending on who it is they may fix it or replace it. As to glue, I mainly use Goop Outdoor glue on the calls I have built. Seems to work well. Home Depot and Wal-mart usally carry it. Alot of the custom call makers will use 100% silicon for the slate. Takes awhile to cure but comes out looking good. |
Author: | Max [ Fri Mar 31, 2006 9:44 am ] |
Post subject: | |
Try Gorllia Industrial grade super strength glue. It holds well... I agree with Tscott if ya bought it from a call maker contact them they should make it right. |
Author: | rel [ Fri Mar 31, 2006 10:24 am ] |
Post subject: | |
I use the "liquid nails" from www.CustomSawing.com. I've bought lots of call making supplies from them and highly recommend. |
Author: | Dale [ Fri Mar 31, 2006 10:35 am ] |
Post subject: | |
I've used 5 minute epoxy on a few of the calls that I made. Easy to work with and rock solid when cured. |
Author: | peacemaker [ Fri Mar 31, 2006 11:24 pm ] |
Post subject: | |
If it's a Primos call, just send it back to them! |
Author: | PApoult [ Sun Apr 02, 2006 5:35 pm ] |
Post subject: | |
I agree with TScottW99. I use Goop when I make my friction (pot) calls. Also don't forget to use some weight to hold it down, or light weight clamps. Hope this helps... DON |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |